|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SC Type Fiber Optic Connectors HSC Series MU SC FC sFeatures 1. JIS, IEC standards compliant and fully intermateable with NTT's SC products. JIS C 5973 (F04 type fiber optic connectors) IEC 61754-4 Harsh Environment 2. Plugs with strain relief boot Long strain relief boot assures that there are no performance losses when a pull force is applied in a vertical bend direction. The color of the boot identify the type of polishing: Blue: PC polishing Light purple: Advanced PC (AdPC) polishing Green: Angled PC polishing (APC) Other colors are also possible. 3. Zirconia Split Sleeve Adapter Reduces the possibility of powdering caused by the repeated insertion and withdrawal of ferrule. Attenuators 4. Duplex SC Type: Rigid Type Available in following types; H type - 8.5 mm spacing between the fibers, for high density applications. F type - 12.7 mm spacing between the fibers, low profile, for LAN applications. Refer to page 39 for further information. 5. Duplex SC Type: Adjustable Type -- Comply With ANSI Standards Floating mechanism with Duplex SC plug. It is also fully compatible with the HSCF fixed type. 6. Simplified Plugs and Receptacles. Terminators Small size (23.8mm plug length) simplified SC plug is designed for equipments inside connection. Refer to page 43 for further information. sApplications LAN, public communications lines, CableTV, computer transmission systems, test equipment, and other applications requiring reliable fiber optic connections. 25 sProduct Specifications Ratings Operating temperature range -25C to +70C Storage temperature range -25C to +70C MU Item Optical Characteristics Insertion Loss (SM) (GI) (SM) Test Method (IEC 61300) Wavelength 1310nm (LD) Wavelength 1310nm (LED) Wavelength 1310nm (LD) Specifications 0.5dB max. (PC, AdPC, APC) 0.3dB max. (PC) 22dB min. (PC) 60dB min. (APC) 22dB min. (PC) Simplex plug Engagement force: 19.6 N max. Separation force: 19.6 N max. Engagement force: 39 N max. Separation force: 39 N max. 2N to 5.9N 2N to 3.9N 40dB min. (AdPC) Return Loss (GI) Engagement and Separation /force SC Measured with corresponding connector. Duplex plug Mechanical Characteristics Ferrule withdrawal force Cable retention (Straight pull) Durability (cycles, mating/un-mating) Vibration Shock Humidity (Temperature/ humidity- cycles) Change of temperature Dry heat Cold Salt mist Extract zirconia gauge 2.499 0.0005 mm dia from split sleeve. 89N tensile load for one minute. 1000 times Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 981 m/s2, 6 ms duration, sin half-wave waveform, 10 cycles in each of the 3 axis. -10C to 65C, humidity: 90% to 96% 20 cycles -40C to +75C 42 cycles (Complies with Telcordia standard GR-326-CORE) 960 hours at 85C 960 hours at -25C 48 hours in a 5% concentration of salt mist Copper alloy split sleeve Zirconia split sleeve 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, dislocation of clamp or cable. FC 1) Insertion loss fluctuation after test: 0.2dB max. 2) No visible damage, cracks or part dislocation. Harsh Environment Environmental Characteristics No significant corrosion. sMaterials Part Simplex plug housing Attenuators Material Synthetic resin Stainless steel Zirconia Synthetic resin or Zinc alloy Synthetic resin Synthetic resin Zinc alloy Zinc alloy Zirconia or Copper alloy Synthetic resin Spring Ferrule Simplex adapter housing 4-position adapter housing 5-position adapter housing Receptacle housing Attenuator housing Split sleeve Terminators Dust cap 26 sFunction diagram Simplex type Adapter-Panel Mounting Plastic Housing Products HSC-A3 HSC-A3-D1 HSC-A3-D2 Die Cast Housing Products HSC-A2 HSC-A2-D1 HSC-PH2-E1,E2,E5 HSC-PH3-B1,B2,B5 0.9 mm fiber Light weight type MU SC type plug housing Strain relief type (For Cable Diameter: 2 mm & 3mm) Conversion adapter FC to SC - Screw Mounting SC HSC-PH0.9-E1,E2,E5 Short length type (For Cable Diameter: 2mm) HSCJ-HRFCJ-B FC to SC - Panel Mounting HSC-PH2-E1-A Short length type (For Cable Diameter: 3mm) HSCJ-HRFCJ-C ST to SC - Screw Mounting FC HSCJ-HSTJ-B HSC-PH3-A4 Receptacle Conversion adapter - FC jack to SC Plug HSCP-HRFCJ-1, 2 HSCP-HRFCJ-1AS, 2AS HSC-R1-B,R2-B Simplified receptacle Harsh Environment HSC-SR-1,D1 HSC-SR-2,D2 SC2 type plug housing Strain relief (For Cable Diameter: 2 mm & 3mm) Attenuators Adapter HSC2-PH2-E1,E2,E5 HSC2-PH3-B1,B2,B5 0.9 mm fiber Type 4-Position Adapter Panel Mounting type HSC2-4A HSC2-4A-D1 5-Position Adapter Panel Mounting type HSC2-PH0.9-E1,E2 Short length type (For Cable Diameter: 2 mm) HSC2-PH2-E1-A Terminators HSC2-5A Simplified receptacle Short length type (For Cable Diameter: 3mm) HSC2-PH3-A HSC2-8SR-1 HSC2-8SR-D1 27 Duplex type MU F type Plug Housing (For Cable Diameter: 2mm&3mm) HSCF-2PH2-E1,E2 HSCF-2PH3-B1,B2 SC For Single mode (For Cable Diameter: 2mm&3mm) F type Panel Mounting HSCF-2A(P) HSCF-2A-D(P) HSCM-2SPH2-B1,B2 HSCM-2SPH3-B1,B2 For Multi mode (For Cable Diameter: 2 mm & 3mm) H type FC HSCM-2GPH2-B1 HSCM-2GPH3-B1 Snap - in HSCH-2A1(P) HSCH-2A1-D(P) Screw Mounting HSCH-2A(P) HSCH-2A-D(P) H type Plug Housing (For Cable Diameter: 2 mm & 3mm) HSCH-2PH2-B1,B2 HSCH-2PH3-B1,B2 Harsh Environment Fixed attenuators For single mode For GI Attenuators HSC-AT 11K-A** See Page 85 for details. HSC-AT5S-B**A Terminators Plug type Tool- Insertion/Removal Terminators HSC-TM-P1 HSC2-TM-P1 Receptacle type Tool Insertion/Removal HSC-TM-R1 See Page 89 for details. HSC2-TM-R1 28 Simplex type MU qStrain relief type 1.8 25 55 9 7.4 0.9 Part Number HSC-PH2-E1(31) HSC-PH2-E2(31) HSC-PH2-E5(31) HSC-PH3-B1(31) HSC-PH3-B2(31) HSC-PH3-B5(31) CL No. 704-0327-3-31 704-0328-6-31 704-3108-6-31 704-0222-5-31 704-0223-8-31 704-3020-7-31 Fiber cable type Boot color Blue Polishing type Outer jacket fixing SC PC AdPC APC PC AdPC APC Crimp Glue O2mm Light purple Green Blue O3mm Light purple Green qLight weight type (For 0.9mm fiber) 25 33 FC 9 7.4 0.9 1.8 Part Number HSC-PH0.9-E1(06) HSC-PH0.9-E2(31) HSC-PH0.9-E5(31) CL No. 704-0339-2-06 704-0354-6-31 704-3104-5-31 Boot color Blue Light purple Green Polishing type PC AdPC APC Harsh Environment qShort length type (For 2mm Cable) 25 9 1.8 36.5 7.4 0.9 Attenuators Part Number HSC-PH2-E1-A(31) HSC-PH2-E2-A(31) HSC-PH2-E5-A CL No. 704-0464-4-31 704-0480-0-31 704-3124-2 Boot color Blue Light purple Green Polishing type Outer jacket fixing PC AdPC APC Glue qShort length type (For 3mm Cable) 36.5 1.8 25 Terminators 9 7.4 0.9 Part Number HSC-PH3-A4(31) HSC-PH3-A4(32) CL No. 704-0245-0-31 704-0245-0-32 Boot color Blue Light purple Polishing type Outer jacket fixing Crimp PC AdPC 29 sTool Insertion/Extraction Plug Housings MU qStrain relief type 55 7.2 6 SC Part Number HSC2-PH2-E1(31) HSC2-PH2-E2(31) HSC2-PH2-E5(31) HSC2-PH3-B1(31) HSC2-PH3-B2(31) HSC2-PH3-B5 CL No. 704-0329-9-31 704-0330-8-31 704-3109-9-31 704-0226-6-31 704-0227-9-31 704-3123-0 Fiber cable type Boot color Blue Polishing type Outer jacket fixing PC AdPC APC PC AdPC APC Crimp Glue O2mm Light purple Green Blue O3mm Light purple Green FC qLight weight type (For 0.9mm fiber) 7.2 33 6 Harsh Environment Part Number HSC2-PH0.9-E1(31) HSC2-PH0.9-E2(31) CL No. 704-0421-1-31 704-0422-4-31 Boot color Blue Light purple Polishing type PC AdPC qShort length type (For 2mm Cable) 7.2 36.5 Attenuators 6 Part Number HSC2-PH2-E1-A HSC2-PH2-E2-A CL No. 704-0482-6 704-0481-3 Boot color Blue Light purple Polishing type Outer jacket fixing Glue PC AdPC qShort length type (For 3mm Cable) Terminators 36.5 7.2 6 Part Number HSC2-PH3-A(31) Note : Please contact HIROSE for other variations. CL No. 704-0015-0-31 Boot color Blue Polishing type Outer jacket attachment Crimp PC 30 sReceptacles 15.2 12.2 13.4 9 MU 12.8 O19 O7 O3 Note: Designed for power meter sensors Part Number HSC-R1-B(05) HSC-R2-B(05) CL No. 704-0022-6-05 704-0023-9-05 Remarks For MM For SM M 15 2-O2.3 SC sFerrules O1 (Hole diameter) qFor PC, AdPC and UPC 1.5 O2.4990.0005 OA+0.001 (Hole diameter) 0 16 7.95 +0.05 1.8 0 FC Part Number HSC-F321-A125(10) HSC-F321-A1255(10) HSC-F321-A126(10) CL No. 704-0070-9-10 704-0200-2-10 704-0071-1-10 A dimension 0.125 O4.6 3 Applicable Fiber cable Harsh Environment 0.1255 0.126 SM,MM qFor APC O2.4990.0005 OA +0.001 (Hole diameter) 0 16.15 8.095 +0.05 0 1.8 O1(Hole diameter) Attenuators O1 Part Number HSC-F391-A125 HSC-F391-A126 HSC-F391-A127 (1)No gap design. (2)The entrance angle of the fiber has been set at 60 for easy fiber insertion. CL No. 704-3101-7 704-3102-0 704-3103-2 A dimension 0.125 0.126 0.127 O4.6 Applicable Fiber cable SM Terminators Minimal gap:(0.1mm max.) 60 fiber entrance angle 31 sAdapters - Panel Mounting qSC adapters MU SC/SC Plastic Housing 27.4 3 1.8 9.4 BPanel cutout 180.1 13 +0.5 0.5 12.8 18 22 9.5 O2.3 0.5 0.5 2-M20.4 or 2-O2.4 Panel thickness: 1.6mm +0.2 0.5 Part Number HSC-A3(51) HSC-A3-D1(02) HSC-A3-D2(06) CL No. 704-0092-1-51 704-0217-5-02 704-3007-9-06 Split sleeve Copper alloy Zirconia Zirconia SC Remarks PC,AdPC(Blue) APC(Green) SC/SC Die Cast Metal Housing 27.4 3 BPanel cutout 1.8 9.4 180.1 13 +0.5 0.5 9.5 0.5 0.5 12.8 FC 18 22 O2.3 2-M20.4 or 2-O2.4 +0.2 0.5 Panel thickness: 1.6mm Part Number HSC-A2(51) HSC-A2-D1(01) CL No. 704-0020-0-51 704-0258-2-01 Split sleeve Copper alloy Zirconia Harsh Environment qSC2 adapters SC/SC2 4-way adapter 24 3 BPanel cutout 28.5 15 13 +0.5 0.5 Panel thickness: 1.6mm 1.8 +0.2 0.5 28.2 Attenuators 12.8 Part Number HSC2-4A(51) HSC2-4A-D1(01) CL No. 704-0024-1-51 704-0290-5-01 Split sleeve Copper alloy Zirconia SC/SC2 5-way adapter (for Multi-mode fiber) Terminators 24 3 1.8 35 BPanel cutout 35.3 +0.5 +0.5 12.8 15 13 +0.5 Panel thickness: 1.6mm +0.5 Part Number HSC2-5A(51) CL No. 704-0025-4-51 Split sleeve Copper alloy 32 sConversion adapters qFC / SC Screw Mounting 21.2 5.5 3.5 12.2 M80.75 12.8 O19 13.4 9 BPanel cutout MU O9 +0.5 +0.5 2-M20.4 or 2-O2.4 +0.2 +0.5 13.40.1 15 Part Number HSCJ-HRFCJ-B(51) CL No. 704-0021-3-51 Split sleeve SC Copper alloy qFC / SC Snap-in and/or Screw Mounting 9.4 BPanel cutout O9 12.8 18 22 +0.5 0.5 2-M20.4 or 2-O2.4 +0.2 +0.5 FC M80.75 18 21.2 180.1 O2.3 Panel thickness: 1.6mm Part Number HSCJ-HRFCJ-C(51) CL No. 704-0206-9-51 Split sleeve Copper alloy Harsh Environment qST / SC Screw Mounting O19 13.4 9 15 BPanel cutout +0.5 O9+0.5 2-M20.4 or 2-O2.4 +0.2 +0.5 2 12.8 O7 O8 2-O2.2 14.7 28.4 13.4 0.1 13.7 1.2 .2 Attenuators Part Number HSCJ-HSTJ-B(51) CL No. 704-0102-3-51 Split sleeve Copper alloy Terminators 33 qFC / SC MU 9.4 12.8 M80.75 9 7.4 (1.8) 21 27.9 Part Number HSCP-HRFCJ-1(51) HSCP-HRFCJ-1AS(51) CL No. 704-0203-0-51 704-0288-3-51 704-0204-3-51 704-0289-6-51 Split sleeve Polishing type Applicable Fiber cable PC AdPC PC AdPC GI-50/125 SC HSCP-HRFCJ-2(51) HSCP-HRFCJ-2AS(51) Copper alloy SM-9.5/125 qThe positions of SC guide key and FC guide slot will not be always aligned. qFC / SC 15 19.5 FC (3.9) 32 13.7 9 12.8 Part Number HRFCP-HSCJ-1(51) HRFCP-HSCJ-1AS(51) CL No. 701-0065-0-51 701-0108-0-51 701-0085-7-51 701-0109-3-51 7.4 O19 Split sleeve Polishing type Applicable Fiber cable PC AdPC PC AdPC GI-50/125 Harsh Environment HRFCP-HSCJ-2(51) HRFCP-HSCJ-2AS(51) Copper alloy SM-9.5/125 qThe positions of SC guide slot and FC guide key will not be always aligned. sCap 5 75 O3.6 Hole Attenuators Part Number HSC-C2 17.8 17.8 11 CL No. 704-0061-8 Applicable products HSC-A2 , HSC-A3 , HSCJ-HRFCJ-B , CHSCJ-HSTJ-B , HSC-R1-B , HSC-R2-B Terminators 34 BMounting Dimensions Unit: mm Combination Adapter Housing HSC-PH2-E1 Plug Panel Plug Adapter Dimensions MU a b c d e f HSC-A2 HSC-A2-D1 HSC-A3 HSC-A3-D1 HSC-PH2-E2 HSC-PH3-B1 HSC-PH3-B2 HSC-PH2-E1-A HSC-PH3-A4 HSC-PH0.9-E1 HSC2-PH2-E1 58 28 15.2 53.4 23.4 10.6 39.5 36 28 26 15.2 15.2 34.9 31.4 23.4 21.4 10.6 10.6 SC HSC2-4A HSC2-4A-D1 HSC2-5A HSC2-5A-D1 HSC2-PH2-E2 HSC2-PH3-B1 HSC2-PH3-B2 HSC2-PH3-A HSC-PH2-E1-A HSC2-PH0.9-E1 HSC-PH2-E1 58 ---- 13.5 53.4 ---- 8.9 39.5 36 ------- 13.5 13.5 34.9 31.4 ------- 8.9 8.9 HSC-R1-B HSC-R2-B HSC-PH2-E1 HSC-PH3-B1 HSC-PH3-B2 FC 57.5 27.5 14.7 ---- ---- ---- Note: Panel thickness: 1.6mm Harsh Environment Attenuators Terminators 35 sTools qCrimp Tool MU Part Number CL No. Applicable connector HSC-T3 704-0287-0 SC plug for 2mm, 3mm cable. SC (1)2mm Jacket crimping: section A 3mm Jacket crimping: section C (2)KevlarTM crimping: section B FC qHSC2 Insertion/Extraction Tool Harsh Environment Part Number HSC-T1-L CL No. 704-0286-8 Applicable Products HSC2 series. 1.Open the tip of tool by compressing levers as shown below. Attenuators Hold/release lever 2.Insert the tool (with opening the tips) into adapter. 3.Release the levers (then the tool catch HSC2 plug) and you can release the connector. Terminators qPlug assemble Tool Part Number HSC2-PH2/CVMD CL No. 902-6029-1 36 SC Duplex BNotes SC duplex adapters can be also connected with Simplex SC plugs. SC type attenuators (HSC-AT11K-A-) can be connected only with F type adapters. MU sPlug Housing qF Type SC 22.1 12.7 7.8 25 55 FC Part Number HSCF-2PH2-E1(P)(31) HSCF-2PH2-E2(P)(31) HSCF-2PH3-B1(P)(31) HSCF-2PH3-B2(P)(31) CL No. 704-2109-3-31 704-2120-6-31 704-2032-0-31 704-2036-1-31 Applicable Cable Diameter O2mm O3mm Boot Color Blue Light purple Blue Light purple Polishing type PC AdPC PC AdPC Harsh Environment qH Type 9 15.89 8.5 Attenuators 25 55 Part Number HSCH-2PH2-B1(P)(31) HSCH-2PH2-B2(P)(31) HSCH-2PH3-B1(P)(31) HSCH-2PH3-B2(P)(31) CL No. 704-2046-5-31 704-2058-4-31 704-2054-3-31 704-2050-2-31 Applicable Cable Diameter O2mm O3mm Boot Color Blue Light purple Blue Light purple Polishing type PC AdPC PC AdPC Terminators 37 sAdapters qF type Snap-in and/or Screw Mounting MU BPanel cutout .3 O2 M2 0.4 2.4 +0.2 0 34.7 30.7 12.7 25.9 9.5 26.2 +0.3 0 30.70.1 9.4 3 1.8 27.4 Panel thickness: 1.6mm Part Number HSCF-2A(P)(51) HSCF-2A-D(P)(06) HSCF-2A-D2(P)(06) 9 CL No. 704-2008-6-51 704-2040-9-06 704-2112-8-06 SC Split sleeve Copper alloy Zirconia Color Blue Green qH type Snap-in 20.5 17.9 27.4 BPanel cutout 15.5 12.8 18 +0.5 0 FC (8.5) 3 1.8 13 +0.3 0 Panel thickness: 1.6mm Harsh Environment Part Number HSCH-2A1(P)(51) HSCH-2A1-D(P)(02) HSCH-2A1-D2(P) CL No. 704-2066-2-51 704-2117-1-02 704-2137-9 Split sleeve Copper alloy Zirconia Color Blue Green qH type Snap-in and/or Screw Mounting 17.9 (8.5) O2.3 BPanel cutout M20.4 or O2.4 3 1.8 18 +0.5 0 +0.2 0 Attenuators 18 12.8 23 13 27.4 +0.3 0 180.1 Panel thickness: 1.6mm Part Number HSCH-2A(P)(51) HSCH-2A-D(P)(02) HSCH-2A-D2(P)(03) CL No. 704-2020-1-51 704-2062-1-02 704-2108-0-03 Split sleeve Copper alloy Zirconia Color Blue Green Terminators 38 BMounting Dimensions MU Plug Panel Adapter Plug Unit: mm f 10.6 10.6 10.6 SC HSCF-2A(P) HSCF-2A-D(P) FC 10.6 10.6 10.6 Note 1: * indicates cable diameter: Note 2: # indicates polishing type: 2= O2mm diameter 3= O3mm diameter 1= PC polishing 2= AdPC polishing Harsh Environment Attenuators Terminators 39 Complies with ANSI Standard ANSI X3T9.3 Fibre Channel Physical and Signaling Interface MU sPlug Housings qFor Single Mode 9.9 1.8 23 12.7 SC 1 8.99 14.1 36.7 61.5 Part Number HSCM-2SPH2-B1 HSCM-2SPH3-B1 HSCM-2SPH2-B2 HSCM-2SPH3-B2 CL No. 704-2100-9 704-2102-4 704-2133-8 -------- Applicable cable Simplex-2mm dia. cable or dual fiber zip cable Simplex-3mm dia. cable or dual fiber zip cable Simplex-2mm dia. cable or dual fiber zip cable Simplex-3mm dia. cable or dual fiber zip cable Boot color Polishing type Blue PC Light purple AdPC FC qFor Multi-mode 9.9 1.8 23 12.7 1.8 Harsh Environment 8.99 14.1 36.7 61.5 Part Number HSCM-2GPH2-B1 HSCM-2GPH3-B1 CL No. 704-2104-0 704-2106-5 Applicable cable Simplex-2mm dia. cable or dual fiber zip cable Simplex-3mm dia. cable or dual fiber zip cable Boot color Polishing type Blue PC sFerrules Attenuators Convertional SC ferrules. Refer to page 33 for details. sAdapters F type SC adapters. Refer to page 40 for details. Terminators 40 Simplified Receptacles & Plug sFeatures MU 1.Space saving Types of SC plug Simplified plug SC plug for 0.9mm fiber Length(mm) 23.8 33 Size comparison SC SC Simplified Plug FC Installation image (33) Harsh Environment SC plug (23) Simplified plug Attenuators Split sleeve Terminators 41 sProduct Specifications Ratings Operating temperature range -25C to +70C Storage temperature range -25C to +70C MU Item Optical Characeristics Insertion Loss Return Loss Ferrule withdrawal Durability (cycles, mating/un-mating) Vibration Shock Humidity resistance (Temperature/ humidity- cycles) Change of temperature Dry Heat Cold (SM) (GI) (SM) (GI) Test Method (IEC 61300) Wavelength 1310nm (LD) Wavelength 1310nm (LED) Wavelength 1310nm (LD) Extract zirconia gauge 2.499 0.0005 mm dia from split sleeve. 1000 times Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 axis. Acceleration of 981 m/s2, 6 ms duration, sine halfwave waveform, 10 cycles in each of the 3 axis. Temperature: -10C to 65C, humidity: 90% to 96% 20 cycles Temperature: -40C / +75C 42cycles (Complies with Telcordia standard GR-326-CORE) 960 hours at 85C 960 hours at -25C Specifications 0.5dB max. (PC, AdPC) 0.3dB max. (PC) 22dB min. (PC) 40dB min. (AdPC) 22dB min. (PC) Copper alloy split sleeve Zirconia split sleeve 2N to 5.9N 2N to 3.9N Mechanical Characteristics SC Insertion loss fluctuation after test: 0.2dB max. No visible damage, cracks or part dislocation. Harsh Environment sMaterials qSimplified receptacle Part Housing Sleeve Split sleeve Plate Material Synthetic resin Synthetic resin Zirconia or Copper alloy Stainless steel Synthetic resin Environmental Characteristics FC Attenuators Dust cap qSimplified plug Part Ferrule Boot Ferrule cap Material Zirconia and Synthetic resin Synthetic resin Synthetic resin qSimplified plug extraction tool Terminators Part Extraction tool Material Synthetic resin 42 sSimplified receptacle to SC O2 qSimplex / Shrouded SR .3 BPanel cutout 0.4 2 -M 2 2- MU SC 22 18 12.8 9 12.8 7.4 9.4 3 26 9.5 +0.5 0 Part Number HSC-SR-1(51) HSC-SR-D1(02) HSC-SR-1(03) CL No. 704-0320-4-51 704-0321-7-02 704-0320-4-03 Split sleeve Copper alloy Zirconia None 13 +0.5 0 180.1 JAPAN SC qSimplex / Unshrouded SR SC BPanel cutout 2-M 2 0.4 22 18 12.5 9 12.5 6.3 12.7 +0.5 0 180.1 FC Part Number HSC-SR-2(51) HSC-SR-D2(06) HSC-SR-2(03) JAPAN 3 16.2 9.35 7.8 8 +0.5 0 CL No. 704-0291-8-51 704-0292-0-06 704-0291-8-03 Split sleeve Copper alloy Zirconia None Harsh Environment qDuplex H type / Shrouded 23 18 12.8 9 12.8 18 +0.5 0 7.4 13 +0.5 0 180.1 Panel thickness: 1.6mm CL No. 704-0293-3-51 704-0294-6-01 704-0293-3-03 26 3 2- 2- M2 1.8 3 0 17.9 15.9 ( 8.5 ) 26 BPanel cutout .4 Part Number HSCH-2SR-1(R)(51) HSCH-2SR-D1(R)(01) HSCH-2SR-1(R)(03) O2 2.3 Attenuators Split sleeve Copper alloy Zirconia None qDuplex H type / Shrouded (Without plate) 18 +0.5 0 M2 0 .4 17.9 15.9 ( 8.5 ) BPanel cutout Terminators 23 18 12.8 9 12.8 7.4 13 +0.5 0 180.1 Part Number HSCH-2SR-3(R)(51) HSCH-2SR-D3(R)(01) HSCH-2SR-3(R)(03) . O2 23 CL No. 704-0300-7-51 704-0301-0-01 704-0300-7-03 Split sleeve Copper alloy Zirconia None 43 2- O2 .3 qDuplex F Type / Unshrouded SCR 2SR BPanel cutout 6.3 2-M20.4 or 2-O2.4 25.5 +0.2 0 MU 34.7 25.5 21.7 12.7 9 25.7 +0.5 0 30.70.1 16.2 3 9.4 7.8 SC Part Number HSCF-2SR-2(P)(51) HSCF-2SR-D2(P)(02) HSCF-2SR-2(P)(03) CL No. 704-0295-9-51 704-0296-1-02 704-0295-9-03 Split sleeve Copper alloy Zirconia None sSimplified Receptacles to SC2 q4-position / Shrouded 2O2 .3 4SR 24.3 10.73 4SR BPanel cutout 0.4 o 2-M2 0 28.6 +0.5 r 2-O2 .4 +0.2 0 37.4 33.4 28.2 FC JAPAN JAPAN 12.4 8+0.5 0 12.7+0.5 0 Part Number HSC2-4SR-1(51) HSC2-4SR-D1(01) HSC2-4SR-1(03) CL No. 704-0311-3-51 704-0312-6-01 704-0311-3-03 Split sleeve Copper alloy Zirconia None Harsh Environment q8-Position / Shrouded 24.3 O 8SR BPanel cutout 8SR 3 2. 10.7 3 2.4 or 2-O 0.4 2-M2 +0.2 0 Attenuators 64.6 60.6 55.4 6 12.4 12.7 0 +0.5 Terminators Part Number HSC2-8SR-1(51) HSC2-8SR-D1(01) HSC2-8SR-1(03) CL No. 704-0266-0-51 704-0270-8-01 704-0266-0-03 60.60.1 56 +0.5 0 Split sleeve Copper alloy Zirconia None 44 8 +0.5 0 19 q8-Position / Unshrouded O2 .3 BPanel cutout 14.5 11.5 3 2-M2 0.4 2-O2. 40 +0.2 MU 12.4 Part Number HSC2-8SR-2(51) HSC2-8SR-D2(01) HSC2-8SR-2(03) CL No. 704-0318-2-51 704-0403-0-01 704-0318-2-03 12.7+0.5 0 Split sleeve Copper alloy Zirconia None 56+0.5 0 60.60.1 64.6 60.6 55.4 SC sSimplified plug qfor 0.9mm fiber 5 5 O2.449 0.0005 OA+0.001(Hole diameter) 0 FC 10.3 4.5 23.8 Part Number HSC2-FK-A125(31) CL No. 704-0267-3-31 704-0268-6-31 A dimension 0.125 0.126 0.1255 Boot color HSC2-FK-A126(31) HSC2-FK-A1255(31) Black 704-0269-9-31 Harsh Environment sSplit sleeve Zirconia 11.4 Copper alloy Part Number HSC-SLIT-SLEEVE(51) HSC-D CL No. 704-0275-1-51 704-0264-5 Split sleeve Copper alloy Zirconia Attenuators sExtraction tool for Simplified plug Terminators 5 7 30 6 20 20 Part Number HSC-T10 CL No. 704-0350-5 Part Number HSC-T12 6 CL No. 704-0448-8 45 |
Price & Availability of HSCP-HRFCJ-2AS |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |